8. Type any key at the serial terminal software and the repeater menu appears as shown in
8.3
Repeater Menu, Configuration and Settings
The Repeater menu displays eight options:
<s> Show Statistics
<0> Reset Statistics
<r> Repeat menu
<m> Switch Repeater mode
<p> Change Power
<d> Change Delay length
<c> Switch Channel
<z> EXECUTE
To select an option, type the character corresponding the desired option on the serial terminal. The options
are case sensitive.
1. Type "s" to show repeater statistics as shown in
Received
The number of frames that have been received.
Retransmitted
The number of frames retransmitted.
Bad
The number of packets received corrupted.
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
Figure 8-7. Repeater menu and configuration
Figure 8-8. Repeater Statistics
Figure
8-8.
Repeater Demonstration
Figure
8-7.
8-5