Table of Contents
Advertisement
Simple ZigBee Test Client (SZTC) Demonstration
7. Create a new serial connection for the board running the SZTC application by clicking the "Add
Internal" button in the "List Of Devices" window as shown in
Figure
7-3.
Figure 7-3. List of Devices Window
8. Select the appropriate COM port and set the baud rate at 19200 as shown in
Figure
7-4.
9. Click the OK button.
Figure 7-4. Device Settings
MC1322x SMAC Demonstration Application User's Guide, Rev. 1.3
Freescale Semiconductor
7-3
Advertisement
Table of Contents
