Rutter VDR-100G3 Installation Manual page 97

For live playback of all channels:
1. Disable Audio Capture;
2. Disable Recording Mode;
3. Select Launch AudioConfigSuite v4.0.1.7 from the Window pull down menu. This will
prompt a dialog and begin a previous version of the AudioConfigSuite which will appear
in the Desk Top task tray of the PC running the Configuration Suite.
4. Click the task tray icon
5. Select Live Playback.
6. Select the check the boxes for the channels you want to hear;
7. Click the task tray icon;
8. Select Analyze Audio to display the Audio Analysis window.
9. Click the task tray icon;
10. Select Capture Audio to begin audio capture;
11. When done listening to live audio, click the Ok button to close Audio Analysis;
12. Click the task tray icon;
13. Select Capture Audio again to stop audio capture.
14. To close AudioConfigSuite v4.0.1.7 click the task tray icon and select Terminate.
Figure 8-23 - Using the audio analysis tool to select Multiple Waveforms
VDR-100G3/G3S Installation Manual
Chapter 8: Audio Module, Rev 1.1
8-26
06/10/2008