Rutter VDR-100G3S Manuals

Manuals and User Guides for Rutter VDR-100G3S. We have 1 Rutter VDR-100G3S manual available for free PDF download: Installation Manual

Rutter VDR-100G3S Installation Manual (434 pages)

Brand: Rutter | Category: Storage | Size: 20 MB

Rutter Vdr-100G3/G3S Installation Manual Chapter 1: System Overview, Rev. 1.1

13
- Table of Contents
  13
- System Overview
  15
  - Vdr-100G3 System Components
    15
    
    Base System
    15
    
    Optional Components
    16
    
    Figure 1-1 - Standard Interconnection Arrangement
    17
    
    Data Management Module
    18
    
    Data Processing Unit
    18
    
    Figure 1-2 - Standard Data Processing Unit
    18
    
    Audio Module
    19
    
    Data Acquisition Unit
    19
    
    Power Control Centre
    19
    
    Power Distribution and Reserve Power
    19
    
    Power Input and Output
    19
    
    Reserve Power
    19
    
    Video Module
    19
    
    Final Recording Medium (FRM/SFRM)
    20
    
    Fixed Capsule
    20
    
    NMEA Input Modules
    20
    
    Operation & Alarm Unit
    20
    
    External Data Interfaces
    21
    
    Float-Free Capsule
    21
    
    Remote Storage Module (RSM)
    21
    
    VDR Software
    22
  - Client/Playback PC
    22
    
    Recommended (Minimum) Requirements
    23
- Chapter 1: System Overview, Rev. 1.1
  16
Rutter Vdr-100G3/G3S Installation Manual Chapter 2: Technical Specifications. Rev. 1.1

25
Rutter Vdr-100G3/G3S Installation Manual Chapter 3: Installation Planning Overview, Rev. 1.1

33
- Chapter 3 : Installation Planning Overview
  35
- Installation Planning Overview
  35
- Required Tools
  35
- Cabling Specification
  36
  - Additional Cable Information
    37
    
    Data Cables
    37
    
    FRM Cable
    37
    
    Power Supply Cable
    37
    
    Video Cable
    37
- Documentation
  38
  - Documentation/Data Required by Rutter Technologies
    38
Rutter Vdr-100G3/G3S Installation Manual Chapter 4: Data Processing Unit, Rev. 1.2

40
- Power Requirements
  38
- Chapter 4 : Data Processing Unit, Rev. 1.2
  42
- Data Processing Unit
  42
- Data Processing Unit (Dpu)
  42
  - Installing the DPU
    42
  - Layout of the DPU
    43
- Ethernet Data
  43
- Power Control Centre
  44
  - Centre
    44
Rutter Vdr-100G3/G3S Installation Manual Chapter 5: Data Acquisition Unit, Rev. 1.1

46
- Chapter 5 : Data Acquisition Unit, Rev. 1.1
  48
- Data Acquisition Unit (Dau)
  48
  - Dau Planning
    48
  - Installing the Dau
    49
  - Dau Connections
    49
    
    Cable Entry System
    50
    
    Video Input Connections
    51
Rutter Vdr-100G3/G3S Installation Manual Chapter 6: Initial Power-Up, Rev. 1.1

52
- Chapter 6 : Initial Power-Up, Rev. 1.1
  54
- Initial Power-Up
  54
- Software Modules
  54
- Power on
  55
- Connecting to the Dpu
  56
  - Using a Keyboard, Mouse, and Monitor
    56
  - Using Remote Desktop
    57
- Ip Range
  57
  - Settings
    59
Rutter Vdr-100G3/G3S Installation Manual Chapter 7: Vdr Record Operating Instructions, Rev. 1.1

60
- Chapter 7 : VDR Record Operating Instructions
  62
- File Menu
  62
- Vdr Record Operating Instructions
  62
- View Menu
  63
- Tests Menu
  65
- Audio A/D Menu
  66
- Nmea A/D Menu
  67
- Video A/D Menu
  67
- Storage Menu
  68
- Window Menu
  68
- Help Menu
  69
Rutter Vdr-100G3/G3S Installation Manual Chapter 8: Audio Module, Rev. 1.1

70
- Audio Module
  72
- Audio Module Planning
  72
  - Planning Zones
    74
  - Coverage Patterns
    76
  - Understanding Zones
    77
- Chapter 8 : Audio Module, Rev. 1.1
  72
- Introduction
  72
- Audio Mounting
  78
  - Mounting Bridge Microphones
    78
    
    Microphone Mounting
    78
    
    Indoor Microphone Assembly
    79
    
    Outdoor Microphone Assembly
    80
  - Mounting the Audio Module
    80
- Audio Connections
  81
  - Indoor Microphone and Buzzer
    81
  - Audio Module Inputs
    82
  - Buzzer Connections
    83
  - External (Outdoor) Microphone Assembly
    84
  - VHF Audio Connection
    85
- Audio Configuration
  85
  - VDRPARAMS.INI File
    85
  - Audio Module Internal Processing Board
    86
    
    Setting Line/MIC Input
    87
    
    Adjusting Phantom Voltage
    88
    
    Adjusting the Gain
    89
  - Audioconfigsuite (Audio Diagnostics) Application
    91
  - Audio Config Suite Operation: Version 4.2.0.4
    91
    
    Startup
    91
    
    Configuring the [AUDIO] Portion of the <Vdrparams.ini> File
    92
    
    Starting from a Blank Audio Module I/O Configuration Window
    93
    
    Detection Threshold Entry Field
    95
    
    Audio Capture
    96
    
    Audio Recording and Analysis
    96
  - Manual Audio Configuration
    98
    
    Testing Microphones
    98
  - Detection Threshold
    100
    
    Record Application - Log Window
    100
    
    Microphone Self-Testing
    102
  - Microphone Test
    103
    
    Sample Detection Threshold Calculations
    106
    
    Test Bridge Audio with a Voice/Sound Check
    108
    
    Test VHF Radios
    108
- Audio Installation Examples
  110
  - Microphone Installation - Sample One
    110
  - Microphone Installation - Sample 2
    112
Rutter Vdr-100G3/G3S Installation Manual Chapter 9: Video Module, Rev. 1.2

116
- Chapter 9 : Video Module, Rev. 1.2
  118
- Introduction
  118
- Video Module
  118
- Video Module Planning
  119
- Video Module Mounting
  120
- Video Module Configuring
  121
  - Video Channel Configuration File
    122
    
    Customize Entries in the Vidchanx.ini Files
    123
  - Video Configuration Suite (VCS2) Application
    124
    
    Video Capture
    125
    
    Horizontal Polarization
    126
    
    Vertical Polarization
    126
  - Sizing
    126
    
    Horizontal/Vertical Offset
    127
    
    Dimensions
    129
    
    Interlaced Image
    130
    
    Interleaved Image
    134
    
    Recalibration
    135
  - Adjustments Tab
    138
    
    Sharpness
    139
    
    Gain/Offset
    140
    
    Clamp
    141
    
    Coast
    141
  - Sync-On-Green (SOG)
    142
    
    Save Settings (REMEMBER!)
    142
  - VDR Params Tab
    143
  - Info Tab
    144
    
    VCS2 Menu Overview
    144
  - Test Video Inputs
    145
  - Set-Up Laptop for Video Module Connection
    145
Rutter Vdr-100G3/G3S Installation Manual Chapter 10: Nmea Module, Rev. 1.3

148
- Video Module Connecting
  121
- 10 Nmea Module
  150
- Chapter 10 : NMEA Module, Rev. 1.3
  150
- Introduction
  150
- Nmea Module Planning
  151
- Nmea Module Mounting
  152
- Nmea Module Connection
  153
- Nmea Module Configuration
  155
  - Checking the NMEA Module Configuration
    155
  - Configuring the NMEA Module
    156
  - NMEA Module ID (MUX ID) - DIP Switch Settings
    157
  - Vdrparams.ini
    158
    
    NMEA Self Test
    158
    
    AIS Data Parsing
    159
  - Verification of NMEA Recording
    159
  - NMEA Error Codes
    160
Rutter Vdr-100G3/G3S Installation Manual Chapter 11: Rev. 1.1

162
- Chapter 11 OPERATION and ALARM UNIT TEST and USER GUIDE
  164
- Oau System Overview
  164
- Planning the Oau
  164
- Remotely Installing the Oau
  165
  - Surface Mounting the OAU
    165
  - Flush Mounting the OAU
    166
- Configuring the Oau
  168
- Connecting the Oau
  168
- 11.6 OAU Display
  169
- 11.7 OAU Keypad
  169
- Oau User Guide
  169
- 11.10 Dimming the Display
  170
- 11.11 Test Screen
  170
- 11.8 Securing Data
  170
- Muting Audible Alarm
  170
- Viewing Recorded Data on the DMM Internal Hard Drive
  171
- Copying Data to Ausb Memory Stick ( or Optional Rsm)
  173
- 11.14 Connecting the USB Memory Stick
  174
- 11.15 Connecting the RSM
  174
- 11.16 Disconnecting the USB Memory Stick or RSM
  175
- 11.17 Re-Connecting the USB Memory Stick or RSM
  176
- 11.18 Status and Alarm Messages
  177
Rutter Vdr-100G3/G3S Installation Manual Chapter 12: Final Recording Medium Setup Rev. 1.5

180
Remote Storage Module (Optional) and Usb Memory Stick

232
Rutter Vdr-100G3/G3S Installation Manual Chapter 14: General and Corrective Maintenance, Rev. 1.2

238
- 14 General and Corrective Maintenance
  240
- General Inspection Procedures
  240
- Air Flow Check
  241
- Chapter 14
  241
- For Additional FRM Service and Annual Certification
  241
- FRM Maintenance
  241
- Corrective Maintenance
  242
Appendix 1: Vdr Installation and Commissioning Checklist, Rev. 1.2

251
- Appendix 1: VDR Installation and Commissioning Checklist
  253
- Installation
  253
- Set to Work & Commissioning
  256
- Component Installation Location
  263
- Ship Sensor Equipment Connections
  264
- Frm Maintenance Sheet
  265
Rutter Vdr-100G3/G3S Installation Manual Appendix 2: System Configuration File, Rev. 1.1

270
- A2.1 Installation
  274
- A2.2 General
  274
  - A2.2.1 Software Version & Software Date
    275
  - A2.2.2 VDR Model
    275
  - A2.2.3
    275
    
    Vdr S/N
    275
  - A2.2.7 IMO Vessel ID
    275
  - A2.2.8
    275
    
    Mmsi
    275
  - A2.2.9 Call Sign
    275
  - A2.2.10 Approval Authority
    276
  - A2.2.11 Classification Society
    276
  - A2.2.12 Number of EPFS Present
    276
  - A2.2.13 Other Comments
    276
  - Appendix 2: System Configuration File
    274
  - Appendix 2: System Configuration File, Rev. 1.1
    274
- A2.3 Primary Storage
  277
  - A2.3.2 Part Number
    277
  - A2.3.3 Serial Number
    277
  - A2.3.4 Date of Manufacture
    278
  - A2.3.5 Beacon Serial Number and Battery Expiry Date
    278
  - A2.3.6 Distance from Bow
    278
  - A2.3.7 Distance from Centerline
    278
  - A2.3.8 Direction from Centerline
    278
  - A2.3.10 FRM IP Address
    278
  - A2.3.11 FRM Subnet Address
    278
  - A2.3.12 Default Gateway IP
    278
  - A2.3.13 Memory Partition Information
    278
  - A2.3.14 Unit Allocations and Stream Names
    279
  - A2.3.15 Other Comments
    279
- A2.4 Secondary Storage
  280
  - A2.4.2 Part Number
    280
  - A2.4.3 Serial Number
    280
  - A2.4.4 Date of Manufacture
    281
  - A2.4.5 Beacon Serial Number and Battery Expiry Date
    281
  - A2.4.6 Distance from Bow
    281
  - A2.4.7 Distance from Centerline
    281
  - A2.4.8 Direction from Centerline
    281
  - A2.4.10 FRM IP Address
    281
  - A2.4.11 FRM Subnet Address
    281
  - A2.4.12 Default Gateway IP
    281
  - A2.4.13 Memory Partition Information for the L3 HVR
    282
  - A2.4.14 Unit Allocations and Stream Names
    282
  - A2.4.15 Other Comments
    282
- Video
  283
  - A2.5.1 Number of Video Displays Connected
    283
  - A2.5.2 Manufacturer
    283
  - A2.5.5 Location of Display
    284
  - A2.5.6 Saved to FRM
    284
  - A2.5.7 Interlaced or Interleaved
    284
  - A2.5.9 Capture Frequency for each Video Channel
    284
  - A2.5.10 Other Comments
    284
- A2.6 Proprietary Strings
  285
  - A2.6.1 Number of Proprietary Systems
    285
  - A2.6.2 Proprietary
    285
  - A2.6.3 Number of Strings
    285
- A2.7 Audio
  286
- A2.8 Navigation
  288
  - A2.8.1 Configure GPS Device
    288
    
    A2.8.1.1 GPS Manufacturer
    288
    
    A2.8.1.2 GPS Model
    288
    
    A2.8.1.3 GPS Location
    289
    
    A2.8.1.4 Talker ID
    289
    
    A2.8.1.5 Input Channel on VDR
    289
    
    A2.8.1.6 Datamux Channel
    289
    
    A2.8.1.7 Sample String
    290
  - A2.8.2 Configure Wind Device
    290
    
    A2.8.2.1 Wind Information
    290
    
    A2.8.2.2 Datamux Channel Path
    291
    
    A2.8.2.3 Talker ID
    291
  - A2.8.3 Configure Autopilot Device
    291
    
    A2.8.3.1 Mux Channel
    291
    
    A2.8.3.2 NMEA Identifier
    291
    
    A2.8.3.3 Field Containing Autopilot Info
    291
    
    A2.8.3.4 Character in Field
    292
    
    A2.8.3.5 Activation Value
    292
  - A2.8.4 Configure Depth Device
    292
    
    A2.8.4.1 Depth Device Manufacturer
    292
    
    A2.8.4.2 Model Identifier
    292
    
    A2.8.4.3 Device Location
    293
    
    A2.8.4.4 Talker ID
    293
    
    A2.8.4.5 Datamux Channel
    293
    
    A2.8.4.6 String to Use for Depth
    293
    
    A2.8.4.7 Sample of Depth String
    293
  - A2.8.5 Configure Heading Device
    293
    
    A2.8.5.1 Heading Device Manufacturer
    294
    
    A2.8.5.2
    294
    
    A2.8.5.3 Device Location
    294
    
    A2.8.5.4 Talker ID
    294
    
    A2.8.5.5 Datamux Channel
    294
    
    A2.8.5.6 String to Use for Heading
    294
    
    A2.8.5.7 Sample of Heading String
    294
    
    Model
    294
    
    A2.8.6.1 Rate of Turn Device Manufacturer
    295
    
    A2.8.6.2
    295
    
    A2.8.6.3 Device Location
    295
    
    A2.8.6.4 Talker ID
    295
    
    A2.8.6.5 Datamux Channel
    295
    
    A2.8.6.6 String to Use for Rate of Turn
    295
    
    A2.8.6.7 Sample of Rate of Turn String
    295
    
    Model
    295
  - A2.8.7 Configure Speed Device
    296
    
    A2.8.7.1 Speed Source on Ship
    296
    
    A2.8.7.2
    296
    
    A2.8.7.2.1. Speed String
    296
    
    Gps
    296
    
    A2.8.7.2.2. Sample String
    297
    
    A2.8.7.3 Speed Log
    297
    
    A2.8.7.4 Speed Log Manufacturer
    297
    
    A2.8.7.5
    297
    
    A2.8.7.6 Speed Log Location
    297
    
    A2.8.7.7 Talker ID
    297
    
    A2.8.7.8 Datamux Channel
    297
    
    A2.8.7.9 String to Use for Speed
    297
    
    Model
    297
    
    A2.8.7.10 Sample of Speed String
    298
  - A2.8.8 Configure AIS Data Device
    298
    
    A2.8.8.1 AIS Manufacturer
    298
    
    A2.8.8.2 AIS Model
    298
    
    A2.8.8.3 AIS MUX Channel
    298
    
    A2.8.8.4 AIS Location
    298
- A2.9 Fire Doors Device
  299
  - A2.9.1 Add Discrete or Add MTPT
    299
  - A2.9.2 Configure Fire Doors Device
    300
    
    A2.9.2.1
    300
    
    A2.9.2.2
    300
    
    A2.9.2.3
    300
    
    A2.9.2.4
    300
    
    Description of Value
    300
    
    Field(S) to be Configured
    300
    
    Full NMEA Identifier
    300
    
    MUX Channel
    300
    
    A2.9.2.5
    301
    
    A2.9.2.6
    301
    
    Onscreen Name
    301
    
    Type of Control
    301
- A2.10 Water Doors
  301
  - A2.10.1 Add Discrete or Add MTPT
    302
  - A2.10.2 Configure Water Doors Device
    302
- A2.11 Hull Openings
  302
  - A2.11.1 Add Discrete or Add MTPT
    303
  - A2.11.2 Configure Device
    303
- A2.12 Alarms
  303
- A2.13 Propulsion
  305
  - A2.13.1
    305
  - This Ship Has" Drop-Down Box
    305
  - A2.13.2
    305
    
    Of Control Locations Drop-Down Box
    305
  - A2.13.3
    306
    
    A2.13.3.1
    306
    
    Engine Description
    306
    
    Example 1 - NMEA Engine Data on Conditional Sentence
    306
    
    A2.13.3.2 Example 2 - NMEA Data from XDR Sentence
    307
- A2.14 Thrusters
  308
  - A2.14.1 Number of Thrusters
    309
  - A2.14.2 # of Control Locations
    309
  - A2.14.3 Thruster Description
    309
- A2.15 Steering
  309
  - A2.15.1 Number of Rudders
    309
  - A2.15.2 Short Rudder Description
    310
  - A2.15.3
    310
    
    Two Rudders with Two Steering Locations - Example 1
    310
- A2.16 Extra Information
  312
Rutter Vdr-100G3/G3S Installation Manual Appendix 4 : Data Retrieval, Rev. 1.1

325
- Appendix 4: Data Retrieval
  327
Section 18

339
- A5.2.1
  343
  - Appendix 5: Playback Software
    343
  - APPENDIX 5: PLAYBACK SOFTWARE, Rev 1.1
    343
- A5.5 Starting Data Playback
  347
- A5.6 Configuring the Client to Receive Real Time Data
  348
- A5.7 Enabling Real Time Display Mode
  348
- A5.8 Starting the Playback in Real Time Display Mode
  349
- A5.9 Passwords
  349
- A5.10 Playback Controls
  350
- A5.11 Audio Volume & Channel Selection
  351
- A5.12 Conning Page
  353
  - A5.12.1 Depth Graph
    353
- A5.13 Wind Information
  354
- A5.14 Propulsion Tab
  354
- A5.16 Proprietary Tab
  355
- Video Channel Display Tab ( S )
  355
- A5.17 Ais Playback Tab
  356
  - A5.17.1 Targets
    356
  - A5.17.2
    357
    
    View Settings
    357
  - A5.17.3
    359
    
    Guardzone
    359
- A5.18 Log Tab
  359
  - A5.18.1 Error Codes
    360
- A5.19 Fire Doors Tab
  361
- A5.20 Water Doors Tab
  362
- A5.21 Hull Openings Tab
  363
- A5.22 Alarms Tab
  363
- A5.23 Data Extraction
  363
  - A5.23.1 Opening Data Extraction Window
    364
  - A5.23.2
    365
    
    Selecting Data for Extraction
    365
- A5.24 Closing the Playback Application
  366
Section 19

367
- Appendix 6: External Interface Modules
  369
  - A6.1 External Data Interfaces
    369
    
    Dataanalog
    369
    
    Datadiscrete
    369
    
    A6.1.3 Dataanalog - 8 Channel Analog to Digital Converter
    370
    
    A6.1.3.1 Technical Specifications
    370
    
    A6.1.3.2 Connection Information
    371
    
    A6.1.3.3 Front Panel Connection Info
    371
    
    A6.1.3.4 Back Panel Connection Info
    371
    
    See below
    371
    
    A6.1.3.5
    372
    
    Input Configuration
    372
    
    A6.1.3.6 High Impedance Settings
    373
    
    A6.1.3.7
    375
    
    A6.1.3.8
    375
    
    NMEA-0183/IEC 61162 String Identifier Configuration
    375
    
    Output Baud Rate Configuration
    375
    
    A6.1.3.10 Replacing the Input Power Fuse
    377
    
    A6.1.3.9 Test Analog Sources
    377
  - A6.2 Datadiscrete Input Module
    377
    
    A6.2.1 Technical Specifications
    378
    
    A6.2.1.1 Connection Information
    378
    
    A6.2.1.2 Front Panel Connection Info
    378
    
    A6.2.1.3
    379
    
    Back Panel Connection Info
    379
    
    A6.2.1.4 Input Configuration
    380
    
    Warning! Exceeding the Selected Voltage Range will Damage the Datadiscrete
    380
    
    A6.2.1.9 NMEA-0183/IEC 61162 String Identifier Configuration
    382
    
    A6.2.1.10 Connecting Multiple Datadiscrete Modules
    384
    
    A6.2.1.11
    384
    
    A6.2.1.12 Replacing the Input Power Fuse
    384
    
    A6.2.2 NMEA Input Module
    384
    
    Test Discrete Inputs (Dry/Hot Contacts, Relays, Etc)
    384

Rutter Categories

Storage

More Rutter Manuals

Rutter VDR-100G3S Manuals

Rutter VDR-100G3S Installation Manual (434 pages)

Table of Contents

Rutter Vdr-100G3/G3S Installation Manual Chapter 1: System Overview, Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 2: Technical Specifications. Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 3: Installation Planning Overview, Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 4: Data Processing Unit, Rev. 1.2

Rutter Vdr-100G3/G3S Installation Manual Chapter 5: Data Acquisition Unit, Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 6: Initial Power-Up, Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 7: Vdr Record Operating Instructions, Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 8: Audio Module, Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 9: Video Module, Rev. 1.2

Rutter Vdr-100G3/G3S Installation Manual Chapter 10: Nmea Module, Rev. 1.3

Rutter Vdr-100G3/G3S Installation Manual Chapter 11: Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Chapter 12: Final Recording Medium Setup Rev. 1.5

Remote Storage Module (Optional) and Usb Memory Stick

Rutter Vdr-100G3/G3S Installation Manual Chapter 14: General and Corrective Maintenance, Rev. 1.2

Appendix 1: Vdr Installation and Commissioning Checklist, Rev. 1.2

Rutter Vdr-100G3/G3S Installation Manual Appendix 2: System Configuration File, Rev. 1.1

Rutter Vdr-100G3/G3S Installation Manual Appendix 4 : Data Retrieval, Rev. 1.1

Section 18

Section 19

Related Products

Rutter Categories