Table of Contents
Advertisement
Introduction
1.6
Technical Specification
Table 1-2:
CP6002 Main Specifications
FEATURES
CPU
Memory
Page 1 - 12
The CP6002 supports the following microprocessors:
Intel® Core™ i7-610E (SV) processor with ECC, 2.53 GHz, 4 MB L3 cache
•
Intel® Core™ i7-620LE (LV) processor with ECC, 2.0 GHz, 4 MB L3 cache
•
Further processor features:
Two execution cores
•
Intel® Hyper-Threading Technology (Intel® HT Technology)
•
Intel® 64 Architecture
•
Intel® Turbo Boost Technology
•
Intel® Intelligent Power Sharing (IPS)
•
System Memory interface with optimized support for dual-channel
•
DDR3 SDRAM memory at 1066 MHz with ECC
Integrated 2D and 3D Graphics Engines
•
DMI and FDI interfaces to the Intel® QM57 chipset
•
Two x8 PCI Express 2.0 ports operating at 2.5 GT/s
•
Please contact Kontron for further information concerning the suitability of
other Intel processors for use with the CP6002.
Main Memory:
Up to 8 GB, dual-channel DDR3 SDRAM memory with ECC running at
•
1066 MHz
Cache Structure:
64 kB L1 cache for each core
•
32 kB instruction cache
•
32 kB data cache
•
256 kB L2 shared instruction/data cache for each core
•
4 MB L3 shared instruction/data cache shared between both cores
•
Flash Memory:
CompactFlash with true IDE mode (CP6002-R1 and CP6002-R1-MC)
•
Two redundant SPI Flash chips (2 x 8 MB) for uEFI BIOS controlled by
•
the BMC
Up to 32 GB NAND Flash via an onboard Serial ATA Flash module
•
(SSD)
Serial EEPROM with 64 kbit
SPECIFICATIONS
ID 1036-6431, Rev. 2.0
CP6002
Advertisement
Table of Contents
