Board Overview - Kontron CP6002 User Manual

CP6002
1. Introduction
1.1

Board Overview

The CP6002 is a highly integrated 6U CompactPCI system controller board based on the multi-
chip Intel® Core™ i7 processor combined with the mobile Intel® QM57 Express chipset.
The board supports the Intel® Core™ i7-610E and the Intel® Core™ i7-620LE processors in
32 nm technology with 64 kB L1 cache, 256 kB L2 cache and 4 MB L3 cache in a BGA package
with frequencies ranging from 2.0 GHz up to 2.53 GHz. The processor and the memory are sol-
dered on the CP6002 which results in higher Mean Time Between Failures (MTBF) and a sig-
nificant improvement in cooling.
The CP6002 includes up to 8 GB, dual-channel Double Data Rate (DDR3) memory with Error
Checking and Correcting (ECC) running at 1066 MHz. The graphics controller and the memory
controller are integrated in the processor.
The CP6002 provides support for up to two PMC/XMC modules, up to 32 GB SATA Flash
memory (SSD) or one 2.5" HDD/SSD, and one CompactFlash card.
The board also includes up to four Intel® 82574L Gigabit Ethernet controllers utilizing x1 lane
PCI Express interconnections to the Intel® QM57 chipset and implemented as up to two ports
on front I/O and two ports on rear I/O (PICMG 2.16).
The CP6002 comes with six Serial ATA interfaces with RAID support, one SATA NAND or
HDD/SSD, one CompactFlash, and four on the rear I/O; one high-resolution graphics interface
(VGA/DP/HDMI); and up to two PMC/XMC slots (64-bit/66 MHz PCI or 64-bit/100 MHz PCI-
X or x8 PCI Express interfaces). In addition, six USB 2.0 ports are available on the board, two
on front I/O and four on rear I/O. Further interfaces include two COM ports, one RS-232 port
implemented as an RJ-45 connector (only available on the CP6002-R1) on the front panel and
routed to rear I/O as well as one RS-422 port on the rear I/O.
The board supports a configurable 64-bit/66 MHz PCI or PCI-X, hot swap CompactPCI inter-
face. When installed in the system slot, the interface is enabled, and when installed in a periph-
eral slot, the CP6002 is isolated from the CompactPCI bus.
The CP6002 further provides Intelligent Platform Management Interface (IPMI) support. On re-
quest, the CP6002 provides safety and security features via a Trusted Platform Module (TPM) 1.2.
The CP6002 is offered in three versions, one with a single PMC/XMC (CP6002-R1) and two
with two PMCs/XMCs (CP6002-R1-MC and CP6002-R2-MC). The CP6002-R1 can further ac-
commodate an onboard 2.5" SATA HDD/SSD and provides two Gigabit Ethernet ports, one
VGA (CRT) port, one COM port and two USB ports on the front panel. The CP6002-R1-MC and
CP6002-R2-MC provide one Gigabit Ethernet port, one DisplayPort and two USB ports on the
front panel. CP6002-R1 and CP6002-R1-MC are designed for standard application environ-
ments whereas CP6002-R2-MC is available with an extended operating temperature range, is
ruggedized for high shock and vibration environments and provides support for conduction
cooled PMCs/XMCs.
Designed for stability, the board fits into applications situated in industrial environments, including
I/O intensive applications where only one slot is available for the CPU, making it a perfect core
technology for long-life applications. Components with high temperature tolerance have been
selected from embedded technology programs, and therefore offer long-term availability.
ID 1036-6431, Rev. 2.0
Introduction
Page 1 - 3