Flange Mounting Of The Ip00 Drive Module - Vacon 100 Flow Installation Manual

INSTALLATION INTO CABINET
5.2.2

FLANGE MOUNTING OF THE IP00 DRIVE MODULE

You can also install the IP00 drive module into the cabinet wall with a flange mounting
option.
NOTE!
The protection classes are different in different sections of the drive module.
Fig. 18: Example of flange mounting (enclosure size MR9)
A. The cabinet wall or other surface
B. The front
C. The rear
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
A
B
D
D. IP00 / UL Open Type
E. IP54 / UL Type 12
VACON · 39
A
C
E
5