Vacon 100 Flow Installation Manual page 93

COMMISSIONING AND ADDITIONAL INSTRUCTIONS
FINDING THE EMC JUMPER, WITHOUT THE OPTIONS MODULE
1 Find the EMC jumper between the terminals L2 and
L3.
2 Remove the EMC jumper.
3 If you change the EMC level, write "The EMC level
was changed" and the date on the "product
modified" label. If the label is not attached at this
time, attach it on the drive near the name plate.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
VACON · 93
Product modified
Date:
Date:
Date:
8