Vacon 100 Flow Installation Manual page 72

VACON · 72
8 Make sure that the grounding conductor is
connected to the motor and also to the terminals
that are identified with
a) To obey the requirements of the standard
EN61800-5-1, obey the instructions in chapter
2.4 Grounding and earth fault protection.
Table 26: Tightening torques of the terminals, MR10 or MR12 with an options module
Enclosu
Type
re size
0385 5-0590 5
MR10
0261 6-0416 6
0261 7-0416 7
0650 5-1180 5
MR12
0460 6-0820 6
0460 7-0820 7
6
.
Tightening torque: the mains and
motor cable terminals
[Nm] lb-in.
55-70 490-620
55-70 490-620
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
POWER CABLING
Tightening torque: the grounding
terminals
[Nm] lb-in.
20 177
20 177