Vacon 100 Flow Installation Manual page 9

APPROVALS
declares under our sole responsibility that the
Product(s) VACON® 100 AC drive
Type(s) Wall-Mounted Drives:
VACON® 0100 3L 0003 2...0310 2
VACON® 0100 3L 0003 4...0310 4
VACON® 0100 3L 0003 5...0310 5
VACON® 0100 3L 0004 6...0208 6
VACON® 0100 3L 0007 7...0208 7
Covered by this declaration is in conformity with the following directive(s), standard(s) or other normative document(s),
provided that the product is used in accordance with our instructions.
Safety: EN 61800-5-1: 2007
EN 60204-1: 2006+A1:2009 (as relevant)
EMC: EN 61800-3: 2004 + A1: 2012
and conforms to the relevant safety provisions of Low Voltage Directive 2006/95/EC (until April 19th, 2016), 2014/35/EU
(from April 20th, 2016) and EMC Directive 2004/108/EC (until April 19th, 2016), 2014/30/EU (from April 20th, 2016).
The year the CE marking was affixed: 2009
Date Issued by
Signature
15-04-2016 Name Antti Vuola
Title Head of Standard Drives
Danfoss only vouches for the correctness of the English version of this declaration. In the event of the declaration being translated
into any other language, the translator concerned shall be liable for the correctness of the translation.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
EU DECLARATION OF CONFORMITY
Danfoss A/S
Vacon Ltd
IP00 Drives:
VACON® 0100 3L 0140 2...0310 2
VACON® 0100 3L 0140 5...1180 5
VACON® 0100 3L 0080 6...0820 6
VACON® 0100 3L 0080 7...0820 7
Enclosed Drives:
VACON® 0100 3L 0140 5...1180 5
VACON® 0100 3L 0080 7...0820 7
Date
15-04-2016
Danfoss A/S
DK-6430 Nordborg
Denmark
CVR nr.: 20 16 57 15
Telephone: +45 7488 2222
Fax: +45 7449 0949
Approved by
Signature
Name Timo Kasi
Title VP, Design Center Finland and Italy
VACON · 9
1