Switching Reports On/Off - Ricoh 2400L Operator's Manual

REPORTS

Switching Reports On/Off

Some of these reports can be switched on or off.
To switch a report on or off, do the following (see page 168 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 0 are now shown
on the bottom line of the display.
k
3. Press until the settings for switch 03 are
shown.
Each digit from 0 to 7 controls one of the
reports (except digit 1) as follows.
Digit
Transmission result report
0
(Memory Transmission)
1 Do not change this setting.
2 File reserve report
3 Polling reserve report
4 Polling result report (polling reception)
Transmission result report
5
(Immediate Transmission)
6 Polling clear report
7 TCR
4. If you wish to change a setting, press the appropriate key on the keypad. For
example, to change digit 2, press 2 on the ten keypad.
5. Finish: Yes and Function.
NOTE: To switch the Confidential File Report on or off, use Function 63 (see
page 73).
To switch the Error Report on or off, contact a service technician.
AUTOMATICALLY PRINTED REPORTS
Digit
Purpose
0: Off 1: On
0: Off 1: On
0: Off 1: On
0: Off 1: On
0: Off 1: On
0: Off 1: On
0: Off 1: On
j
j
j k
j k
7 6 5 4 3 2 10
Default Setting: On
Default Setting: Off
Default Setting: Off
Default Setting: On
Default Setting: On
Default Setting: On
Default Setting: On
125