Multi-Copy Document Reception (Feature Expander Required) - Ricoh 2400L Operator's Manual

RECEPTION

Multi-copy Document Reception (Feature Expander Required)

Using this feature, more than one copy of each incoming fax message can be
printed. You may also choose to have more than one copy from only select
senders. This feature eliminates the extra steps needed to have someone make
photocopies.
For example, if you switch this feature on overnight, you will not have to make
distribution copies of the messages that came in during the night. However, the
paper in the cassette will be used up much faster.
To use Multi-copy Document Reception, you must first:
Switch Multi-copy on. (Function 62)
Set the number of copies. (Function 83)
Switch reverse order printing on. (See page 87.)
If you wish to specify the senders whose messages are Multi-copied:
Specify the senders whose messages you want to Multi-copy (Special
Terminals). Do this by programming the RTI's or CSI's of these senders
(Function 81).
Select the messages to Multi-copied: (Function 63)
a) All messages from Special Terminals.
b) All messages except those from Special Terminals.
Cross-reference
Reverse Order Printing: see page 87.
88
Copying an Original: see page 113.
ADVANCED FEATURES