Storage Capacity For Telephone Numbers - Ricoh 2400L Operator's Manual

APPENDIX

Storage Capacity for Telephone Numbers

When you use the three features listed in the following table, you can dial more
than one number. Some functions have different capacities.
COMMUNICATION
FEATURE
Broadcasting
Polling Reception
The following table shows how many telephone numbers you can store in the
machine.
1 This is the number of full telephone numbers that can be input into the
machine at any one time. For example, if there is a broadcasting operation in
memory using 66 full numbers, you can only input one more full number for
any operation, including storage in groups, until the broadcast has finished.
Also, if you have stored, say, 30 numbers at the ten key pad into your groups,
then you will only be able to input 37 full dial numbers at any one time for
other operations, such as broadcasting.
2 You can program up to 7 groups. Each group can contain up to 132 numbers.
You can store any Quick Dial or Speed Dial number in a group. You may also
store up to 67 numbers that are not programmed as Quick or Speed Dials;
see Note 1 above for the restrictions on the use of these numbers.
3 This is the theoretical maximum number of pages that can be stored.
PAGE MAX. NUMBER OF
ADDRESSES/FAX
MESSAGE
62 132
157 132
Quick Dials
Speed Dials
Ten Key Pad ( 1)
Groups ( 2)
QUICK DIAL, SPEED DIAL, AND GROUP DIAL
TOTAL TOTAL
FAXES ADDRESSES
FOR ALL
FAXES
300
(Note: Any
fax number
can be used
132
for more than
one fax
message at
the same
time)
30
100
67
7
MAX.
STORED
Pages
Standard: 40
With 1M: 120
With 2M: 200
With 4M: 360
( 3)
221