Table of Contents
Advertisement
HOW TO USE THIS MANUAL
CONVENTIONS
The following conventions were used when writing this manual.
Keynames
These have been printed in a bold typeface.
For example: When you see a command in bold such as "Start" means "Press
the Start key on the operation panel".
On the operation panel, there are four arrow keys (up, down, left,
right). This is the scroll key. It is often used in the operating
procedures to gain access to various features. For example, if you
see
right-pointing arrow (
Displays
Messages seen on the display are shown in a larger box, normally on the right
hand side of the page, directly opposite the step that brought it up on the screen.
After following a step in a procedure, check the display to see if it corresponds to
the one in the manual. This may help you to check whether you are following the
procedure successfully. The following examples show three common types of
display.
Example A: The keys that can be pressed
are shown on the upper right of the display.
In this example, you can press Yes and
k
and
on the scroll key.
Example B: The choices of settings for a
feature are shown on the screen. The
current setting is indicated (it is set to ON). If
j
k
you press
or
on the scroll key, the
setting will be changed to OFF.
Example C: The
the display indicates that you can input
letters using the Quick Dial keys, and
k
on the scroll key.
k
in the manual, you are being asked to press the
k
) on the scroll key.
in the upper right of
j
j
k
t t t t t t t t t t t t t t t t t t t t
and
CONVENTIONS
j k
j k
5
Advertisement
Chapters
Table of Contents
