Replacing The Adf Roller Assembly And The Separation Pad - Ricoh 2400L Operator's Manual

LOOKING AFTER THE MACHINE
5. Re-install the toner cassette.
Slide the toner cassette into the ma-
chine as far as it will go. Gently push
down the cassette to secure it in place.
6. Close the upper cover and lower the op-
eration panel.

Replacing the ADF Roller Assembly and the Separation Pad

You should replace the ADF (Auto Document Feeder) roller assembly and the
separation pad to prevent misfeeds about every 30,000 sheets. To check how
many sheets you've scanned, please refer to the section titled "Counters" (see
page 118).
To get the new roller and pad, contact your service representative.
1. Open the operation panel.
2. Remove the old ADF roller assembly.
USER MAINTENANCE PROCEDURES
145