Communication Problems; Operating Difficulties - Ricoh 2400L Operator's Manual

OPERATING DIFFICULTIES

COMMUNICATION PROBLEMS

If "
Press Stop.
A poor line caused the communication to fail.
The line is busy or noisy. Try to retransmit.
The other machine is out of order.
Ask the other party to check their machine.
OPERATING DIFFICULTIES
Problem
STANDBY MODE
Nothing happens when the
power switch is turned on.
not displayed.
The display does not show
the Ready condition, or the
machine stops during an
operation.
TRANSMISSION
The original is not pulled into
the auto docment feeder.
158
" appears in the display:
Check the power cord. Is it properly plugged into the outlet?
is Switch the power on.
Does CLEAR ORIGINAL or CLEAR COPY appear in the
display ?
Does ADD PAPER appear in the display?
Does CLOSE COVER appear in the display?
Is the Add Toner indicator on?
You did not feed the document far enough into the feeder.
Do user maintenance, especially rollers [A] and [F] (see page
139).
The telephone line is disconnected.
The telephone line type setting is incorrect.
The dialed number does not contain an access code or a
pause.
The dialed number did not have enough pauses between the
access number and the telephone number.
Required Action
Plug it in firmly.
If the Power indicator does not light, check
that the power cord is plugged in.
Clear the misfed paper.
See pages 150 and 152.
Load paper into the paper tray. See page 132.
Close all covers.
Load a new toner cartridge. See page 133.
Insert the document into the feeder until it stops.
Retransmit.
If the same problem still exists after user
maintenance, adjust the auto document feeder
mechanism (see page 151).
Check that the line is connected properly.
Check the telephone line type setting
(see page 192).
Include the access number and a pause before
the telephone number.
Try adding more pauses after the access code.
SOLVING PROBLEMS