Printing A Sample Of Data On The Reports - Ricoh 2400L Operator's Manual

REPORTS
F
Note: To switch the Confidential File Report on or off, use Function 63 (see
page 124).
F
To switch the Error Report on or off, contact a service technician.

Printing a Sample of Data on the Reports

For reference purposes, the machine prints the first few inches of the fax
F
message on the following reports.
F Transmission Result Report
F Memory Storage Report
Polling Clear Report
F
F Communication Failure Report
F Transfer Result Report
Polling Confirmation List
The procedure to switch this feature on or off is as follows. (See page 11 if you
need more information about the User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
k
3. Press until the settings for switch 04
are shown.
The setting you need to use is digit 7.
4. If you wish to change the setting, press 7
of the ten key pad.
5. Finish: Yes and Function
AUTOMATICALLY PRINTED REPORTS
j
Digit 7 (Double underlined)
0: This feature is off
1: This feature is on
j
j k
j k
175