Set Up The Child Clock(S) - Icon Time Systems TOTALPASS Small Business Premium User Manual

Note: It is recommended that the Parent Clock be setup at the location of the person processing the
timecards. For instructions on assigning a static IP address, refer to
to the Time

Set Up the Child Clock(s)

1. With the Child Clock connected to the Network, enter Supervisor Mode.
Press
•
Enter your security code. The default security code is 00 00 00.
•
2. Press Up or Down until the Convert to Child option displays.
3. Press Enter. The time clock displays, This will remove all data, then Erase all Memory.
4. Press In to convert to a Child Clock.
5. Choose the method that your Child Clock will use to connect to the Parent Clock.
Follow the instructions accordingly.
6. Connect via Broadcast: the Child Clock will connect to the Parent Clock by searching
the network for a clock with the Parent Clock's serial number. This is the preferred
method if your multi-clock system will be connected on a simple local area network.
The Child Clock will remain connected to the Parent Clock, even if the Parent Clock's IP
address changes.
7. Connect via IP Address: the Child Clock will connect to the Parent Clock by searching
the network for a clock with the Parent Clock's assigned IP address. This is the preferred
method, if your multi-clock system will be connected over a wide area network or
remotely over the Internet.
Connect Your Child Clock via Broadcast Method
1. The clock displays Locate Parent By by Broadcast? Press Enter.
2. The clock will then display Finding Clocks Please Wait as it scans the network for the
Parent Clock.
3. Once the Child Clock locates the Parent Clock(s) on the network, the clock displays the
serial number of the Parent Clock. Select the serial number of the Parent Clock, and
then press Enter.
4. If there is more than one Parent Clock on the Network, press Up or Down to find the
correct Parent Clock serial number, then press Enter.
5. Skip to the Continuing Multi-clock Setup section.
Clock.
on the time clock.
Assign a Static IP Address
95