Network Settings; Assign Badges; Set Date/Time - Icon Time Systems TOTALPASS Small Business Premium User Manual

Network Settings

LAN Settings
Set IP Address
Look up the Ethernet IP address assigned to the clock. Also allows for assigning a static IP
address, subnet mask, gateway, and DNS.
1. To assign a static IP address, follow the instructions under Assign a Static IP Address
to the Time Clock on page 98.
•
Wifi Settings
Set IP Address
Look up the Ethernet IP address assigned to the clock. Also allows for assigning a static IP
address, subnet mask, gateway, and DNS.
•
•
View Networks
Allows you to view wireless networks in range, connect to a wireless network, or switch to a
different wireless network. Refer to the
connecting wirelessly.
WPS Setup
Allows you to connect to a wireless network using WPS. Refer to page
using WPS connection.

Assign Badges

This option is used when assigning a proximity badge to an employee. Refer to
Proximity Badges to an Employee

Set Date/Time

1. From Supervisor Mode, scroll through the options using Up or Down until you find the
option Set Date/Time and press Enter.
To erase all network settings and revert back to DHCP so that the router will
assign the IP address, set the IP address to 000.000.000.000.
To assign a static IP address, follow the instructions under
Address to the Time Clock
To erase all network settings and revert back to DHCP so that the router will
assign the IP address, set the IP address to 000.000.000.000.
Wifi Connection
on page
on page 98.
section on page
65.
Assign a Static IP
80 for instructions on
81 for instructions on
Assigning
79