Connecting Using The Software Interface; Ethernet Connection - Icon Time Systems TOTALPASS Small Business Premium User Manual

6. Open a Web browsers on your PC. Type in the IP address in the Web browser URL bar,
press Enter.
7. You should be directed to the time clock Login page.

Connecting Using the Software Interface

In order to connect your time clock to the wireless network using the software interface,
you must first have it connected to your network or computer using the Ethernet or USB
cable.
1. Log into your time clock software interface, on either a Parent Clock or Child Clock.
2. Go to Settings | Network Settings. The Wifi Network Settings screen displays the available
wireless networks.
3. Click the appropriate network.
4. Type the password in the available field, then click Connect.
5. The network selected appears at the top of the list, with an indication the time clock is
"connected" to the wireless network.

Ethernet Connection

Connect your time clock directly to your network for a faster and more reliable connection
than wireless can offer.
1. Plug one end of the Ethernet cable, provided in the package, to an available port on your
router, DSL modem or switch.
2. Connect the other end to the Ethernet port on your time clock.
3. Plug the time clock into the power. Wait for the time clock to fully boot up, it will state
Enter ID Number.
Note: If there is a wireless network in range, you'll be prompted to connect to the wireless network.
Press Clear to cancel and move to step 4.
4. Enter into Supervisor Mode at your employee time clock terminal.
• Press
• Enter your security code. The default security code is 00 00 00.
86
on the time clock.