Ip Address Setting; Initial Setting Tools Connection Function - Mitsubishi Electric G-50A Instruction Book

5 - 8 IP address setting

• This function allows setting of the IP address and mask address needed at LAN connection.
MENU
6 ADDRESS SETTING
7 FUNCTION SETTING
8 IP ADDRESS SETTING
IP ADDRESS SETTING
IP ADDRESS:
192.168.001.001
SUBNET MASK:
255.255.255.000

5 - 9 Initial setting tools connection function

• This function connects the initial setting tool PC by LAN.
• Group setting, interlocked setting, and other information can be downloaded to this unit by using the initial setting
tool.
Refer to the initial setting tool manual for an explanation of the initial setting tool functions and operating proce-
dures.
LAN changeover switch
FRONT
NOTE:
• The same settings that are made with the Initial Setting Tool can be made from the Initial Setting Web.
• Refer to the Operation Manual for Initial Setting Web for the functions and operation of the Initial
Setting Web.
1Select the
setting menu screen.
The IP address setting screen appears.
2Move the cursor to the address setting position by pressing the
and
3Set the address with the 0 to 9 numeric switches.
4When all address setting are complete, return to the initial setting menu
screen by pressing
ACT
LINK
Service LAN connector
REAR
switch select "8 IP ADDRESS SETTING" on the initial
6
keys.
BACK
switch.
SCREEN
1Remove the cover from the controller by inserting a flat blade
screwdriver into the gap between the cover and body and twist-
ing the screwdriver.
2Use the dedicated cable (sold separately) to connect the initial
setting tool PC to the service LAN connector.
3When changed to FRONT with the LAN changeover switch,
the initial setting tool PC is connected to the service LAN con-
nector.
4When setting with the initial setting tool is complete, return the
LAN changeover switch to the REAR position.
*When a service LAN connector is used, the optional service
Model PAC-YG00FA-E is necessary.
– 35 –
, ,