Chapter 4 Setting Remote Station; Setting The Ip Address/Station Number Setting Switches - Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual

4
SETTING REMOTE STATION
The functions of the I/O module can be set using the function setting switch on the CC-Link IE TSN remote I/O module. The
setting using the IP address/station number setting switches is enabled when the power of the I/O module is ON. Therefore,
use the IP address/station number setting switches when the power of the I/O module is OFF.
IP address/station number setting switches
4.1
Setting the IP Address/Station Number Setting
Switches
The fourth octet of the IP address is set using the IP address/station number setting switches on the front of the I/O module.
IP address (192.168.3.1) is set for the CC-Link IE TSN remote I/O module (NZ2GN2S1-32DT) in this manual. (Page 9
System Configuration)
192.168.3.1
First octet
Second octet
Third octet
Fourth octet
For details, refer to the following.
Section 6.2 Setting Switch in the CC-Link IE TSN Remote I/O Module User's Manual (CC-Link IE TSN Communication
Mode)
Function setting switch
4 SETTING REMOTE STATION

4.1 Setting the IP Address/Station Number Setting Switches

4
25