Polycom Hdx System Settings For A Polycom Vortex Mixer; Settings For Non-Polycom Microphones - Polycom HDX 4000 Series Administrator's Manual

Polycom HDX System Settings for a Polycom Vortex Mixer

Settings for Non-Polycom Microphones

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Touch Favorites.
2
Select Polycom Austin Stereo.
3
The Polycom Austin Stereo site demonstrates the stereo feature with an
entertaining and informative presentation.
To configure a Polycom HDX 9000 series, Polycom HDX 8000 series, or Polycom
HDX 7000 series system to use a Polycom Vortex mixer:
(Polycom HDX 9000 series only) Do one of the following:
1
— In the local interface, go to System > Admin Settings >Audio >
Inputs/Outputs (select
— In the web interface, go to Admin Settings >Audio.
Set Input type to Line Input.
a
Disable Echo Canceller.
b
Do one of the following:
2
— In the local interface, go to System > Admin Settings > General
Settings > Serial Port (select
— In the web interface, go to Admin Settings > General Settings >
Serial Port.
Set RS-232 Mode to Vortex Mixer for the appropriate port.
3
Refer to the Polycom Vortex documentation for details on configuring the
mixer.
To configure a Polycom HDX 9004, Polycom HDX 9002, or Polycom HDX 9001
system to use devices connected directly to audio input 1:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Audio >
Inputs/Outputs (select
— In the web interface, go to Admin Settings > Audio
Do the following:
2
Set Input Type to Microphone.
a
Enable Echo Canceller.
b
Microphones and Speakers
if necessary).
if necessary).
if necessary).
4–21