Recording Configuration - Agilent Technologies FieldFox N9912A User Manual

During playback, choose from the following:



Recording Configuration

To change Recording Configuration settings:
 Press Trace 6
 Then
 Then
 Then
Then choose from the following:
102
Temporarily halts playback. Then choose from the following:
Pause Resume
Pause Resume Press to continue playing.
o
Playback State/Tag
o
scroll through the state tags. Enter a value between 1 and the total number
of state tags using the numeric keypad, ▲|▼ arrows, or the rotary knob.
Learn more in About State and User Tags on page 100.
Playback Trace Activated automatically when Paused. Allows you to
o
continue playback from a specific trace, or scroll through traces manually.
Enter a value between 1 and the total number of traces using the numeric
keypad, ▲|▼ arrows, or the rotary knob.
Immediately stops playback. Then choose from the following:
Stop
Play Start playback from trace 1.
o
Resume recording from the last recorded trace.
Record
o
Record Playback Setup
o
settings or Close the session.
Record Playback Setup
or
New Session
Recording Configuration
Record Time Sets the amount of time to record traces. Default is MAX,
o
which is to record indefinitely. Enter a value between 1s and 1 Ms (million)
seconds using the numeric keypad, ▲|▼ arrows, or the rotary knob. When
set, a timer appears during recording in the lower-left corner which counts
DOWN from the specified time.
Sets where, in the FieldFox data flow, data is recorded.
Record Source
o
Learn more about Record Source on page 104.
Choose from the following:
Records raw measurement data.
RawMeas
o
Records data from the corresponding trace in its current
Trace 1,2,3,4
o
state.
Sets the amount of time to wait between individual trace
Record Interval
o
recordings. Default is MIN, which is to wait 0 seconds (record traces as fast
as possible). Enter a value in seconds between 0 (no delay) and 10,000
seconds - about 3 hrs) using the numeric keypad, ▲|▼ arrows, or the rotary
knob.
Allows you to continue playback from a state tag, or
Return to the setup menu to change Configuration
an existing session.
Recall
N9912A FieldFox User's Guide