Then
Then enter a value from 0 (the most recent sweep record) to the maximum
At the current sweep speed, the difference in time between these two markers
An invalid (very large number) appears when a trace record is not available at
How to Restart the Spectrogram
Press Sweep 3 then
Averaging
Averaging can be enabled on the underlying measurement. Press Trace
then
Measurement Preset
Measurement Preset resets ONLY the Spectrogram and Waterfall display settings.
It does not reset the measurement settings.
Press Preset
Then
Waterfall Display
The live trace is always drawn on a Waterfall display. Older trace records scroll
up from the displayed trace and eventually off the screen. Because of this, locate
the live trace on the bottom of the screen using the scale and reference settings.
Learn more on page 63.
Note:
Although this document refers to past traces as „records‟ these traces are not
saved. They are only drawn on the FieldFox screen.
Interference Analyzer (SA Mode) Option 236
Delta
value, using the numeric keypad, ▲|▼ arrows, or the rotary knob. A
indicates the Delta Marker.
appears at the upper-right corner of the view as
one or both of these markers.
Restart
State
[Average]. Learn more on page 78.
Meas Preset
Delta Time: hh:mm:ss Sec.
6
97