Agilent Technologies FieldFox N9912A User Manual page 148

 Then
 Then
 Then
 Press and hold the power button to shutdown, then restart the FieldFox.
For more information about Licensing, see the FieldFox Service Manual at
http://na.tm.agilent.com/fieldfox.
GPS
GPS (Global Positioning System) allows you to „stamp‟ each data trace with your
physical position in latitude/longitude/elevation format. This can be useful when
making measurements on cell towers or other antennas at remote locations.
NOTE This feature is usable ONLY with the GPS receiver that is shipped with Microsoft
"Streets and Trips" and "AutoRoute". The GPS receiver is NOT available from
Agilent. Only the GPS USB receiver is used with the FieldFox. Therefore, it is
NOT necessary to purchase the very latest version of the map software.
 GPS can be used in all FieldFox modes.
 Your GPS settings can be saved with Preferences. Learn more on page 146.
How to make GPS settings
 Press System 7
 Then
 Then
 Then choose from the following:
148
System Configuration
Options
Install Options The FieldFox reads, validates, then installs the options.
System Configuration
GPS
- Disable GPS (default setting).
OFF
o
External - Enable GPS using an external, customer-supplied, USB dongle
o
device. When enabled, a check is made to detect a USB GPS device at the
USB connectors. When a device is detected, a search is made for satellites
overhead. The GPS works best when outdoors and in full view of the open
sky. When several satellites are found, the following screen appears and is
updated frequently:
N9912A FieldFox User's Guide