Agilent Technologies FieldFox N9912A User Manual page 93

Channel power measurement with .22 RRC applied
RRC Weighting is set and enabled automatically when included in a selected
radio standard.
To set and enable RRC Weighting:
 Press Meas Setup 4
 Then
 Then
 Then
 Enter a value between 0 (no smoothing) and 1 (most smoothing) using the
 Press Enter
SA (Spectrum Analyzer) Mode
RRC Weighting ON OFF
More
RRC Alpha [current setting]
numeric keypad, ▲|▼ arrows, or the rotary knob. A standard level of filtering
is .22.
93