Agilent Technologies FieldFox N9912A User Manual page 151

 Then press Edit.
 Use the ▲|▼ arrows or rotary knob to select the field to be edited.
 Use the ▲|▼ arrows or numeric keypad to edit that field.
 Press
 Press
NOTE Although allowed during entry, year settings higher than 2088 will not be
changed on the screen.
LAN Settings
Configure the LAN settings to be used to communicate with the Data Link
Software. Learn more at: http://na.tm.agilent.com/fieldfox/datalink_info.html.
LAN Settings
How to configure the LAN settings
The first three „Current...‟ settings can NOT be edited.
 Press System 7 .
 Then
 Then LAN.
 Use the ▲|▼ arrows to select one of the following, then press Edit.
System Settings
or
Cancel Done
to exit the Date and Time settings. The readout in the upper-right
Done
corner of the FieldFox screen will update accordingly.
System Configuration.
Hostname Change the name that can be used to address the FieldFox if
o
your server supports this feature. The default hostname is generated
automatically.
Obtain IP Choose from:
o
o DHCP - IP Address is assigned dynamically. If your server supports this
feature, the IP Address for the FieldFox is assigned each time it is started.
o Static - Set the IP Address manually. The Address remains until you
change it.
Static IP Address - Enter the IP Address – including periods - in the format
o
nnn.nnn.nnn.nnn
Static Subnet Mask - Enter the Subnet Mask – including periods - in the
o
format nnn.nnn.nnn.nnn
when the edits are complete.
151