Agilent Technologies FieldFox N9912A User Manual page 106

 Then
 Then
 Then
This session can be played back into any Trace State. For example:
Play the Max Hold recording into a Clear/Write trace to see the data exactly as
it was recorded.
 Press Trace 6 then with
 Then
 Then
Play the Max Hold recording into a Max Hold trace to show the accumulation of
"Max Hold" activity over the entire recording.
 Press Trace 6 then with
 Then
 Then
106
Recorder Player
At the end of each 10 second record interval, the Max Hold trace
Record
is recorded and the Max Hold processing is reset for the next 10 second record
interval.
to end the recording.
Stop
Record Player
Play
Record Player
Play
= 1 and press
Trace State
= 1 and press
Trace State
then
Clr/Wr
then
Max Hold
N9912A FieldFox User's Guide