Radio Standard; Custom Radio Standards - Agilent Technologies FieldFox N9912A User Manual

How to change frequency step size
When using the ▲|▼ arrows to change any of the frequency settings, the size of
the frequency step can be changed.
 Press Freq/Dist
 Then
 Then

Radio Standard

A Radio Standard is a collection of settings that are applied to the FieldFox for
specific RF protocols. When a Radio Standard is applied, the FieldFox frequency
and channel settings change to that of the standard.
By default, the FieldFox locates the center frequency of the standard in the
middle of the screen and sets the frequency span to cover all of the Uplink and
Downlink frequencies. The selected Radio Standard name appears in the center
of the screen below the X-axis.
After a Radio Standard has been selected, the frequency range can be changed by
selecting channel numbers rather than frequency. Learn how on page 62.
When a Channel Measurement is selected such as ACPR, other relevant settings
will be changed such as Integration BW. Learn more about Radio Standards and
Channel Measurements on page 85.
How to select a Radio Standard
 Press Measure 1 OR Freq/Dist then
 Then
 Then select a standard using the ▲|▼ arrows or rotary knob and press Enter.

Custom Radio Standards

Beginning with Rev A.05.50, your own custom Radio Standards can be imported
into the FieldFox. Custom standards are created in *.csv (spreadsheet) format.
A template and instructions for creating your custom Radio Standard is at:
http://na.tm.agilent.com/fieldfox/help/Reference/CustomRadioStandard.htm
Once imported, the *.csv file is stored in the FieldFox \User Data\ folder. The
custom Radio Standards are read and presented at the top of the list of internal
Radio Standards.
How to Import and Delete a Custom Radio Standard
First, press Save/Recall and select the
will be read. Most likely this will be USB or SD Card.
 Press Measure 1 OR Freq/Dist then
SA (Spectrum Analyzer) Mode
More
CF Step Auto Man
Each press of the ▲|▼ arrows increments or decrements the value by
Auto
o
th
1/10 (one division) of the current frequency span. Note: To change this
setting from Man to Auto, press CF Step twice.
Type a step size value using the numeric keypad, then select a
Man
o
multiplier key. Learn about multiplier abbreviations on page 18.
Radio Standard
More
from which the Radio Standard
Device
More
61