Overview; Options And Features - Agilent Technologies FieldFox N9912A User Manual

Overview

Options and Features

The FieldFox may be ordered to include the following options and features:
Overview
Options and Features
Cable and Antenna Test (CAT) Mode
▪ 2 MHz to 4 GHz (Option 104)
▪ 2 MHz to 6 GHz (Option 106)
Measurements:
▪ Distance-to-fault (DTF)
▪ DTF & Return Loss
▪ Return Loss (dB)
▪ VSWR
▪ DTF (VSWR)
▪ Cable Loss (1-Port)
▪ Insertion loss (2-Port) (Option 110)
Transmission Measurement (Option 110)
QuickCal (Option 111)
Built-in cal kit. Industry first!
Spectrum Analyzer (SA) Mode
General purpose measurements for basic monitoring and
troubleshooting.
▪ 100 kHz to 4 GHz (Option 230)
▪ 100 kHz to 6 GHz (Option 231)
▪ Preamplifier for Spectrum Analyzer (Option 235)
▪ Interference Measurements (Option 236)
Power Meter Mode (Option 302)
Use with Agilent External USB Power Sensors
Network Analyzer (NA) Mode (Option 303)
▪ 2 MHz to 4 GHz (Option 104)
▪ 2 MHz to 6 GHz (Option 106)
▪ Vector 1-port (Standard)
▪ Scalar 2-port (Option 110)
Measurements:
▪ S11 Reflection (several formats)
▪ S21 Transmission (several formats) (Option 110)
▪ A receiver
▪ R receiver
Vector Voltmeter (VVM) Mode (Option 308)
Measure electrical length
Measurements:
▪ 1-Port Cable Trimming (Mag and Phase)
Learn more
CAT Mode on page 19
CAT Mode on page 19
NA Mode on page 37
Cal on page 51
SA Mode on page 58
On page 64
On page 94
Power Meter Mode on
page 107
NA Mode on page 37
VVM Mode on page 113
7