Table of Contents
Advertisement
WARNING
CAUTION
CAUTION
For the AC/DC Adapter
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Safety Considerations
When performing a measurement, ensure that the right safety and performance
ratings of the instrument and accessories are used.
Do not expose the circuit or operate the instrument without its cover or while power is
being supplied.
Do not operate the instrument in any environment at risk of explosion .
The power cord and connectors shall be compatible with the connector used in the
premise electrical system. Failure to ensure adequate earth grounding by not using the
correct components may cause product damage and serious injury.
The measuring terminals on this instrument are designed to be used with external
signals described in Measurement Category I, but NOT with external signals described
in Categories.
The AC/DC adapter is a Safety Class 1 Product (provided with a protective
earthing ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth contact. Any
interruption of the protective conductor inside or outside of the product is
likely to make the product dangerous. Intentional interruption is prohibited.
Use only the designated AC/DC adapter supplied with the instrument.
Use only the designated power cord supplied with the AC/DC adapter.
No operator serviceable parts inside this product. Do not perform any
unauthorized modification to the product. Return the product to Agilent
Technologies or a designated repair center for service to ensure that safety
features are maintained.
Operated at an ambient temperature: 0 to 40°C; full power rating; derate
linearly to 50 W at 50°C.
Maximum output rating: +15V/4.0 A.
Input rating: AC 100–240 V, 50/60Hz
Main Plug : Use a 3–pin main plug that complies with IEC 60884–1, Plugs and
Socket–Outlets for Household and Similar Purposes – Parts1: General
Requirements and country specific safety authority requirements, such as UL,
SA, BSI, VDE, CCC, SA, NZ, and PSE.
Appliance Connector: Use an appliance connector certified to IEC 60320–
1/EN 60320–1 requirements
171
Advertisement
Chapters
Table of Contents
