Agilent Technologies FieldFox N9912A User Manual page 32

 Then
 Select
 Then:
How to Edit a Cable File
The FieldFox includes many predefined cable files with the manufacturer‟s
specifications. You can edit these files or create new cable files using the
following procedure or using the FieldFox Data Link Software. Learn more at:
http://na.tm.agilent.com/fieldfox/datalink_info.html
The Cable correction data survives a Mode Preset and Preset.
With a DTF measurement present:
 Press Meas Setup 4
 Then
 Then
 Press
 Then
 Then use the ▲|▼ arrows to select a field,
 Optionally choose from the following:
 Press
32
DTF Cable Specifications
Cable Corr
Auto Use Cable Loss and Velocity Factor values from a Cable file. See "How
o
to Edit, Save, and Recall a Cable File" below. This will overwrite a manually-
entered value.
Man (Default setting) Manually enter a value for Cable Loss and Velocity
o
Factor.
Using the numeric keypad, enter a value between 0.01 and
Velocity Factor
o
1. Then press Enter.
Using the numeric keypad, enter a positive Cable Loss value in
Cable Loss
o
dB/m, then press Enter.
DTF Cable Specifications
Edit/Save/Recall Cables
then to clear all data from the existing DTF Cable table and
New Yes
reset header information to default settings.
to open the Cable Editor.
Edit Cable
When editing Cable Description information, press
o
selected field using the FieldFox labeler.
When editing Frequency/Loss pairs, enter numbers using the numeric
o
keypad, then select a frequency suffix. Then Enter. Learn more about "How
the Freq/Loss pairs are applied" below.
Previous / Next Page
o
Add a blank Freq/Loss pair to the table,
Add Data
o
then:
Delete/Clear
o
Delete Line Remove the selected Freq/Loss pair from the table.
o
then
Clear All Yes
o
header information to default settings.
to close the Cable Editor.
Done
Quickly scrolls through pages of Freq/Loss data.
Remove all Freq/Loss pairs from the table and resets
then modify the
Edit
N9912A FieldFox User's Guide