Manage Sessions; Record Playback Example - Agilent Technologies FieldFox N9912A User Manual

 Enter a value in seconds between 0 (no delay) and 100 using the numeric
 Press

Manage Sessions

 Press Trace 6
 Then
The following selections are available ONLY when a session is NOT open.
 Then
 Then choose from the following:
 Then
 Then choose from the following:

Record Playback Example

The following "Interval Recording" example shows how you can record spectral
activity over a longer period of time with less trace storage.
 Press Trace 6 then, with
 Then
 Then
 Then
 Then
 Then
 Then
Interference Analyzer (SA Mode) Option 236
keypad, ▲|▼ arrows, or the rotary knob. After using the keypad, select a
multiplier key. Learn about multiplier abbreviations on page 18.
Enter
Record Playback Setup
to select the media which stores the sessions to be
Storage Device
managed. This is a different setting from the Save/Recall Storage Device
setting.
FieldFox memory (default)
Internal
o
An external SD Card (must be inserted)
SD Card
o
An external USB flash drive (must be inserted)
USB
o
Manage Sessions
Using the FieldFox labeler, change the name of the session.
Name
o
AutoSession (n) is the default name where (n) is the next-available number.
Learn how to use the labeler on page 134.
Arrange the listing of sessions
Sort
o
Delete After a confirmation prompt, removes the contents of the selected
o
session from the list.
Copies the selected session to a different storage device, or the same
Copy
o
storage device with „Copy_‟ appended to the beginning of the name.
Copies ALL of the listed sessions to a different storage device, or
Copy All
o
the same storage device with „Copy_‟ appended to the beginning of the
names.
Record Playback Setup
New Session
Recording Configuration
to Trace1
Record Source
to 10 s(seconds).
Record Interval
Back
by Name, by
= 1, press then
Trace State
Date, or
by (file) Size.
Max Hold
105