Agilent Technologies FieldFox N9912A User Manual page 112

Limits
In Power Meter Mode, Minimum and Maximum limits set a visible range of
acceptable readings between these two values. Readings that are below the
minimum or above the maximum are clearly visible on the power meter display.
How to set Limits
 Press Limit 8.
 Then choose from the following:
112
Min Limit On Off Toggles the display of the Minimum limit ON and OFF.
o
Sets the Minimum limit power value. Power reading lower
Min Limit Value
o
than this will exceed the limit.
Toggles the display of the Maximum limit ON and OFF.
Max Limit On Off
o
Sets the Maximum limit power value. Power reading
Max Limit Value
o
higher than this will exceed the limit.
N9912A FieldFox User's Guide