Trane S*HF*20-75 Troubleshooting Manual page 87

Stop Dehumid if Space RH Below STP Minus
Occ Dehumid Hysteresis Offset:
• Press Next/Previous keys to navigate.
Dehumidify if Space Humidity Above
Unocc Dehumidification Setpoint:
• Press Next/Previous keys to navigate.
Stop Dehumid if Space RH Below STP Minus
Unocc Dehumid Hysteresis Offset:
• Press Next/Previous keys to navigate.
Default Supply Air Reheat Stpt:
Supply Air Reheat Deadband:
• Press Next/Previous keys to navigate.
In Active Dehumidification Mode, Limit
Maximum Reheat Valve Position To:
• Press Next/Previous keys to navigate.
Dehumid Ovrd High Zone Temp Stpt:
Dehumid Ovrd Low
• Press Next/Previous keys to navigate.
Cond Coil Purge Interval Setpt:
• Press Next/Previous keys to navigate.
RT-SVP07B-EN
Zone Temp Stpt:
Used With: Units w/Dehumidification
Option
5%
Factory Preset: 5 %
Possible Values: 3 to 10 %
Used With: Units w/Dehumidification
Option and Unocc Dehumid. Enabled
60%
Factory Preset: 60 %
Possible Values: 40 to 65 %
Used With: Units w/Dehumidification
Option and Unocc Dehumid. Enabled
5%
Factory Preset: 5 %
Possible Values: 3 to 10 %
Used With: Units w/Dehumidification
70°F
Option
4°F
Factory Preset:
Reheat Setpoint: 70ºF
Reheat Deadband: 4ºF
Possible Values:
Reheat Setpoint: 60 to 80ºF
Reheat Deadband: 2 to 10ºF
Used With: Units w/Dehumidification
Option
85%
Factory Preset: 85 %
Possible Values: 50 to 85 %
Used With: VV/CVDA Units w/
75°F
Dehumidification Option
68°F
Factory Preset:
Ovrd High Temp: 75ºF
Ovrd Low Temp: 68ºF
Possible Values:
Ovrd High Temp: 70 to 85ºF
Ovrd Low Temp: 60 to 75ºF
Used With: Units w/Dehumidification
90 Min
Option
Factory Preset: 90 Minutes
Possible Values: 60 to 120 Minutes
SETPOINT Menu
87