Trane S*HF*20-75 Troubleshooting Manual page 101

Configuration - Model Num Digit 30 or 22
Dehumid w/ Hot Gas Reheat: NOT INSTALLED
Note: "Dehumid w/Hot Gas Reheat" is INSTALLED if the
configuration jumper in the wire harness of the RTM module is
installed.
• Press Next/Previous keys to navigate.
Configuration - Model Num Digit 30 or 22
Hot Gas Bypass:
Note: If "Hot Gas Bypass" is INSTALLED, Low Charge Protection
and Lead/Lag functions will be automatically disabled.
• Press Next/Previous keys to navigate.
Configuration - Model Num Digit 31 or 19
Ambient Control:
Note: When set to "STANDARD" the Low Ambient Compressor
Lockout setpoint may not be set less than 40ºF. When set to "0
DEGREE F" the setpoint can be set down to -20ºF.
• Press Next/Previous keys to navigate.
Configuration - Model Num Digit 33 or 30
Remote Human Interface
• Press Next/Previous keys to navigate.
Configuration - Model Num Digit 34 or 35
BAS Communication Module
• Press Next/Previous keys to navigate.
Configuration - Model Num Digit 34 or 28
GBAS 0-5 VDC Module
• Press Next/Previous keys to navigate.
Configuration - Model Num Digit 34 or 28
GBAS 0-10 VDC Module
• Press Next/Previous keys to navigate.
RT-SVP07B-EN
Used With: All IntelliPak Units
Possible Values:
NOT INSTALLED
INSTALLED
Note: This screen is not adjustable.
Used With: All Units
Possible Values:
INSTALLED
NOT INSTALLED
INSTALLED
Used With: All Units
Possible Values:
STANDARD
STANDARD
0 DEGREE F
Used With: All Units
Possible Values:
INSTALLED
NOT INSTALLED
INSTALLED
Used With: All Units
Possible Values:
INSTALLED
NOT INSTALLED
INSTALLED
Used With: All Units
Possible Values:
INSTALLED
NOT INSTALLED
INSTALLED
Used With: All Units
Possible Values:
INSTALLED
NOT INSTALLED
INSTALLED
CONFIGURATION Menu
101