Trane S*HF*20-75 Troubleshooting Manual page 39

Active SA Min Target Setpoint:
Active SA Target Low Limit:
The Target Low Limit is a calculated value which corresponds to the
Maximum Fan Speed during cooling (see SA Target Setpoint on
previous screen). The Min Target Setpoint reflects the SA Cooling
Setpoint value and corresponds to the Minimum Fan Speed during
cooling.
• Press Next/Previous keys to navigate.
End of Submenu (NEXT) to Enter STATUS
• Press Next/Previous keys to navigate.
ENERGY RECOVERY STATUS SUBMENU SCREENS
Energy Recovery Status Submenu
Press ENTER to View Data in This Submenu
• Press the Next key to skip this Submenu.
Energy Wheel Relay:
Energy Wheel Proving:
• Press Next/Previous keys to navigate.
Outside Air Bypass Damper Pos:
Exhaust Air Bypass Damper Pos:
• Press Next/Previous keys to navigate.
Energy Wheel Frost Avoidance:
Leaving Recovery Exhaust Temp:
• Press Next/Previous keys to navigate.
MPM Preheat Relay:
• Press Next/Previous keys to navigate.
End of Submenu (NEXT) to Enter STATUS
• Press Next/Previous keys to navigate.
RT-SVP07B-EN
Used With: Units w/SZVAV(VVZT)
50.0 °F
Option
38.4 °F
Possible Values:
MinTarget: Equal to SA Heating
Setpoint
Low Limit: (calculated)
Fan speed modulation in cooling occurs
when the Target Setpoint modulates
between the Min Setpoint and Low Limit
Setpoint.
Used With: Units w/Energy Recovery
Option
Used With: Units w/Energy Recovery
ON
Option
ON
Possible Values: ON, OFF
Used With: Units w/Energy Recovery
0%
Option
15%
Possible Values: 0 to 100%
Used With: Units w/Energy Recovery
INACTIVE
Option
45.0°F
Possible Values:
Frost Avoidance: ACTIVE, INACTIVE;
Exhaust Temp: -40.0 to 200.0ºF
Used With: Units w/Energy Recovery
OFF
Option w/Preheat
Possible Values: ON, OFF
STATUS Menu
39