Actuator Setup
Max Voltage
• Press Next/Previous keys to navigate.
Actuator Setup
Direct/Reverse Act
• Press Next/Previous keys to navigate.
Actuator Setup
Max Stroke Time
• Press Next/Previous keys to navigate.
Actuator Setup
Min Voltage
• Press Next/Previous keys to navigate.
Actuator Setup
Max Voltage
• Press Next/Previous keys to navigate.
Actuator Setup
Direct/Reverse Act
• Press Next/Previous keys to navigate.
Note: Only one of the following two screens will be shown
Actuator Setup
Max Stroke Time
Actuator Setup
Max Stroke Time
Press the Next key to navigate forward.
RT-SVP07B-EN
Exhaust Damper/VFD
10.0 VDC
Exhaust Damper/VFD
DIRECT ACTING
Hydronic
60 Sec
Hydronic
2.0 VDC
Hydronic
10.0 VDC
Hydronic
DIRECT ACTING
Num 1 Low Ambient
OR
Cond Fan VFD Ckt 1
Used With: Units w/Power Exhaust
Factory Presets: 10.0 VDC
Possible Values: 0 to 10.0 VDC
Used With: Units w/Power Exhaust
Factory Presets: DIRECT ACTING
Possible Values: DIRECT ACTING,
REVERSE ACTING
Used With: Units w/Hydronic Heat and/
or Chilled Water Installed
Factory Presets: 60 Sec
Possible Values: 1 to 255 Sec
Used With: Units w/Hydronic Heat and/
or Chilled Water Installed
Factory Presets: 2.0 VDC
Possible Values: 0 to 10.0 VDC
Used With: Units w/Hydronic Heat and/
or Chilled Water Installed
Factory Presets: 0 VDC
Possible Values: 0 to 10.0 VDC
Used With: Units w/Hydronic Heat and/
or Chilled Water Installed
Factory Presets: DIRECT ACTING
Possible Values: DIRECT ACTING,
REVERSE ACTING
Used With: Units w/DX Cooling, w/Air-
Cooled Condensers
60 Sec
Factory Presets: 60 Sec
Possible Values: 1 to 255 Sec
Used With: Units w/DX Cooling, w/
Water-Cooled Condensers
60 Sec
Factory Preset: 60 Sec
Possible Values: 1 to 255 Sec
SETUP Menu
79