Trane S*HF*20-75 Troubleshooting Manual page 37

Outside Air Damper Target:
Outside Air Damper Position:
• Press Next/Previous keys to navigate.
VCM Preheater Output Control:
VCM Module Aux Temp Input:
• Press Next/Previous keys to navigate.
End of Submenu (NEXT) to Enter STATUS
• Press Next/Previous keys to navigate.
RETURN FAN STATUS SUBMENU SCREENS
Return Fan Status Submenu
Press ENTER to View Data in This Submenu
• Press the Next key to skip this Submenu.
Return Fan Relay:
Return Airflow Proving:
• Press Next/Previous keys to navigate.
Return Fan VFD Command:
Return Plenum Pressure:
Top line shown only if Return Fan VFD is installed.
• Press Next/Previous keys to navigate.
Return Plenum Pressure Target:
Return Fan VFD Pos:
"Opening to" and "Closing to" indicates direction.
"Limited to" indicates an active override.
• Press Next/Previous keys to navigate.
RT-SVP07B-EN
47.2 °F
0.8 IWC
0.8 IWC
Opening to
Used With: Units w/Fresh Air Options
27 %
Possible Values: 0 to 100%
24 %
Used With: Fresh Air Measurement
OFF
(VCM) w/DCV or OA Damper Min Position
(VCM) w/DCV and Preheat ENABLED
Possible Values:
Output Control: ON, OFF
Aux Temp Input: -40.0 to 200.0ºF
Used With: Units w/Return Fan Option
Used With: Units w/Return Fan Option
ON
Possible Values: ON, OFF
ON
Used With: Units w/Return Fan Option
45 %
Possible Values:
Command: 0 to 100%
Pressure: -0.7 to 3.5 IWC
Used With: Units w/Return Fan Option
Possible Values:
45 %
Target: -0.5 IWC, or 0.1 to 2.5 IWC
VFD Pos: 0 to 100%
STATUS Menu
37