Trane S*HF*20-75 Troubleshooting Manual page 70

SETUP Menu
Ventilation Override Definition Mode A
Heat
• Press Next/Previous keys to navigate.
Ventilation Override Definition Mode A
VCM Preheater State
• Press Next/Previous keys to navigate.
Ventilation Override Definition Mode A
Ventilation Override Relay
• Press Next/Previous keys to navigate.
Ventilation Override Definition Mode A
Enter Password to Lock Definition:
Note: After locking a MODE (by entering the password), the displays
for that MODE becomes "Reporting" only and the definition cannot be
changed unless the Ventilation Override Module is replaced. If the
password was entered, pressing the NEXT key will scroll through the
previous screens to confirm the selected choices for each mode as
follows:
• Press Next/Previous keys to navigate.
Ventilation Override Mode A Is Locked
Supply Fan
Note: This is "Reporting Only" display. After all of the "VOM A"
entries have been viewed or modified, the following screen will be
displayed:
• Press Next/Previous keys to navigate.
Ventilation Override Mode B
Supply Fan
Note: Follow the preceding steps, used in programming Mode "A",
to program VOM Mode "B", "C", "D", and "E" if modifications are
needed.
• Press Next/Previous keys to navigate.
End of Submenu (NEXT) to Enter SETUP
• Press Next/Previous keys to navigate.
70
Used With: Units w/VOM and Heat
Installed
OFF
Possible Values: OFF, IN CONTROL
Used With: Units w/ and OA Preheater
Function Enabled
IN CONTROL
Possible Values: OFF, IN CONTROL
Used With: Units w/VOM Installed
Possible Values: ENERGIZED,
ENERGIZED
DEENERGIZED
Used With: Units w/VOM Installed and
Mode Not Locked
Used With: Units w/VOM Mode Locked
Factory Presets: See Definitions Above
ON
Possible Values: N/A
Used With: All Units
Factory Presets: See Definitions Above
OFF
Possible Values: ON, OFF
RT-SVP07B-EN