Trane S*HF*20-75 Troubleshooting Manual page 49

IntelliPak II Config Input:
Dehumidification Config Input:
• Press Next/Previous keys to navigate.
RTM Supply Airflow Proving:
RTM Exhaust Airflow Proving:
"RTM Exhaust..." shown for Power Exhaust w/o Return Fan.
"RTM Return..." shown for Power Exhaust w/ Return Fan.
• Press Next/Previous keys to navigate.
RTM Remote Min Position Pot Input
Note: If potentiometer input is out of range (> 350 ohms) this
screen will not appear.
• Press Next/Previous keys to navigate.
RTM Supply Air Pressure Input
• Press Next/Previous keys to navigate.
RTM Outside Air Humidity
ECEM Return Air Humidity
"OA Humidity" shown only if comparative enthalpy installed.
"RA Humidity" shown only if comparative enthalpy installed, or
non-IpakII units with humidification control.
• Press Next/Previous keys to navigate.
RTM Space Humidity
• Press Next/Previous keys to navigate.
ECEM Space Pressure Input
• Press Next/Previous keys to navigate.
RT-SVP07B-EN
Used With: All Units
CLOSED
Possible Values: OPEN/CLOSED
OPEN
Used With: All Units
FLOW
Possible Values: Flow, No Flow
FLOW
Bottom Left Field:
RTM Exhaust Airflow Proving
RTM Return Airflow Proving
Used With: Units w/Outside Air Damper
0 %
and Minimum Position Source is RTM.
Possible Values: 0 to 100%
Used With: VVDA or Units w/Supply Air
2.1 IWC
Pressure is present.
Possible Values: 0 to 5.0 IWC
Used With: Units w/Economizer Option
55 %
Possible Values: 10 to 90%
46 %
Used With: Units w/Dehumid. or Humid.
10 %
Option
Possible Values: 10 to 90%
Used With: Units w/Statitrac Option
0.08 IWC
Possible Values: -0.67 to 0.67 IWC
STATUS Menu
49