Oil Tank - Rotax 912 i Series Installation Manual

Connections
Thread
Tightening torque of oil return line
2.2)

Oil tank

See
Connections
NOTE:
Connections for oil circuit (engine)
Graphic
Fig. 8
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Screw connection (optional)
Fig. 8 and Fig. 9.
Only use the oil tank provided in the scope of deliv-
NOTICE
WARNUNG
ery, as its design has changed compared with older
tanks.
Optional extra:
Nipple either straight or with 90° elbow. Metric M18x1.5 or
UNF 3/4-16 thread.
Check what type of thread or connection there is on
NOTICE
WARNUNG
the supplied oil tank.
3
1
Part
1 Oil feed line
2 Oil outlet
3 Purging nipple
3/4-16 UNF/M16x1.5
25 Nm (18.44 ft.lb.)
2
Function
79-00-00
Page 13
January 01/2012