1.4)
Measuring of the vacuum
See
Measuring of the
vacuum
Measure the vacuum in the suction oil line (1) - from the oil tank via the oil
cooler to the engine oil pump - at a distance of max. 100 mm (4 in.) from
the oil pump suction connector (2).
At full throttle, the indicated vacuum (3) upstream of the oil pump must
not be less than 0.3 bar (4.35 psi), otherwise the oil hose (1) could col-
lapse and block the oil supply to the engine.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Fig. 4.
The vacuum (3) (pressure gauge with liquid damping)
WARNING
WARNUNG
must be verified over the complete engine operation
range. If the oil is cold, the flow resistance increases,
which means that not enough oil will flow on the suc-
tion side.
79-00-00
Page 7
January 01/2012