Preservation And Storage Of The Engine; Protective Coverings - Rotax 912 i Series Installation Manual

Governor pivot point (A)
Graphic
Fig. 1
1.3)

Preservation and storage of the engine

The engine is preserved at BRP-Powertrain thus guaranteeing proper pro-
General note
tection against corrosion damage for at least 24 months after the date of
delivery from BRP-Powertrain.
This warranty is subject to the following conditions:
Warranty
- The engine must be stored in the GENUINE-ROTAX packing as sup-
plied by BRP-Powertrain.
- The covers on various openings must not be removed.
- The engine must be stored in a suitable place (at min. -40 °C/-40 °F
and max. +80 °C/176 °F).
- The flat bag (blue) surrounding the engine must not be damaged or
removed, as it protects the engine from corrosion and oxidation.
If the engine is stored for a period longer than 12 months (not stored in the
Storage
GENUINE-ROTAX packing) then maintenance tasks must be carried out
every 3 months as per the currently valid maintenance manual, section
"Preservation of a new engine".
1.4)

Protective coverings

General note
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Protective coverings are only for use during transport
NOTICE
WARNUNG
and engine installation. They must be removed before
the engine is operated.
10-10-00
Page 4
January 01/2012