Connections; Fitting The Amp Connector - Rotax 912 i Series Installation Manual

2.2)

Connections

See
Connection
Insert the wiring harness plug in the correct position on the FUSE BOX
assy.
FUSE BOX supply:
- X3 plug
The mating plug for the FUSE BOX is included in the scope of delivery.
NOTE:
Graphic
Fig. 4
2.3)

Fitting the AMP connector

See
General note
NOTE:
The following special tools and equipment are necessary for fitting the
Special tools
AMP connector.
n.a.
n.a.
n.a.
Fitting the AMP connector:
Procedure
Step
1
2
3
4
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Fig. 4.
A set of spare fuses can be found in the FUSE BOX.
2
1
3
Fig. 5.
The AMP connector is included in the scope of delivery.
Part number
Crimping pliers TYCO-Connectivity 69710-1
Tool TYCO-Connectivity 90145-1
Disassembly tool TYCO-Connectivity 91124-1
Feed line (1) through the connector receptacle (5), squeeze plate (6) and ca-
ble holder (7).
Strip insulation from line.
Install socket contact (2) using suitable crimping pliers.
Push the socket contact into the appropriate position in the AMP connector
until it engages.
PIN 1 backup battery switch
PIN 2 start power switch
PIN 3 start power switch
Description
Procedure
06393
76-00-00
Page 6
January 01/2012