Rotax 912 i Series Installation Manual page 35

All openings are protected against ingress of contamination and damp-
ness. It is recommended to leave the protective plugs in place until instal-
lation of the specific feed line.
NOTE:
List of protective coverings. See
Protective cover-
ings
Graphic
Fig. 2
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
The transport equipment and plugs must be reattached if
the engine will be sent to the manufacturer or distributor.
Fig.
Pos. Installation location
1 Exhaust sockets
2 Fuel pressure regulator (outlet)
3 Fuel pressure regulator (inlet)
4 Oil inlet/outlet
5 Supply and discharge of coolant
6 Throttle valve support assy.
7 Propeller shaft on version 3
2.
10-10-00
Page 5
January 01/2012