Connecting Sizes And Position Of Connections; Oil Circuit - Rotax 912 i Series Installation Manual

2) Connecting sizes and position of connections

General note
NOTE:
2.1) Oil circuit (engine)
See
General note
Depending on engine configuration, the oil feed line connectors may
vary:
- 912 iSc/iS thread M18 optional UNF thread
Connection:
Oil pump (inlet)
Screw socket (1)
Tightening torque of inlet line
Oil pump inlet
Graphic
Fig. 6
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
INSTALLATION MANUAL
Utilize the full slip-on length for all connections. Se-
NOTICE
WARNUNG
cure hoses with suitable screw clamps or crimp con-
nections.
The oil line connections are optionally available as UNF
threads.
Fig. 6.
Oil pump (inlet)
Part
1 3/4-16 UNF/M16x1.5 screw socket
2 Alternative connection
3/4-16 UNF/M16x1.5
25 Nm (18.44 ft.lb.)
Function
79-00-00
Page 11
January 01/2012