Vrrp Defaults - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring VRRP

VRRP Defaults

The following table lists the defaults for VRRP configuration through the
relevant command keywords:
Description
Virtual router enabled or
disabled
Priority
Preempt mode
Advertising interval
The following table lists the defaults for VRRPv2 configuration using the VRRP collective management
features and the relevant command (VRRPv3 does not support the collective management functionality in
this release):
Default advertising interval for
all the virtual routers on the
switch.
Default priority value for all the
virtual routers on the switch.
Default preempt mode for all the
virtual routers on the switch.
Parameter value that is to be set
and/or override with the new
default value in all the virtual
routers on the switch.
Default advertising interval for
all the virtual routers in the
group.
Default priority value for all the
virtual routers in the group.
Default preempt mode for all the
virtual routers in the group.
Parameter value that is to be set
and/or override with the new
default value in all the virtual
routers in the group.
In addition, other defaults for VRRP include:
Description
VRRP traps
VRRP delay
OmniSwitch AOS Release 8 Network Configuration Guide
Keyword
enable | disable
priority
preempt | no preempt
advertising interval
vrrp interval
vrrp priority
vrrp preempt
vrrp set
vrrp group
vrrp group
vrrp group
vrrp group set
Command
vrrp|vrrp3 trap
vrrp delay
December 2017
VRRP Defaults
vrrp|vrrp3 command and the
Default
Virtual routers are disabled
100
Preempt mode is enabled
VRRPv2 = 1 second
VRRPv3 = 100 centiseconds
1 second
100
preempt
all
1
100
preempt
all
Default
Enabled
45 seconds
page 23-2