Verifying The Bfd Configuration - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring BFD

Verifying the BFD Configuration

To display information such as the BFD status for different session parameters and Layer 3 protocols, use
the show commands listed in the following table:
show ip bfd
show ip|ipv6 bfd interfaces
show ip|ipv6 bfd sessions
show ip bgp
show ip bgp neighbors
show ipv6 bgp neighbors
show ip isis status
show ip isis vlan
show ip ospf
show ip ospf interface
show ipv6 ospf
show ipv6 ospf interface
show ip pim sparse
show ip pim dense
show ipv6 pim sparse
show ipv6 pim dense
show ip pim interface
show ipv6 pim interface
show vrrp|vrrp3
show vrrp track
show ip router database
protocol static
show ipv6 router database
For more information about the resulting displays form these commands, see the OmniSwitch AOS
Release 8 CLI Reference Guide. Examples of the above commands and their outputs are given in the
section "Configuring BFD" on page 20-14.
OmniSwitch AOS Release 8 Network Configuration Guide
Displays the global BFD configuration for the routing instance.
Displays the BFD interface configuration for the switch.
Displays the BFD neighbors and session states.
Displays the BFD status for the BGP protocol.
Displays the BFD status for IPv4 BGP neighbors.
Displays the BFD status for IPv6 BGP neighbors.
Displays the BFD status for the IS-IS protocol.
Displays the BFD status for IS-IS VLANs.
Displays the BFD status for the OSPF protocol.
Displays the BFD status for OSPF interfaces.
Displays the BFD status for the OSPFv3 protocol.
Displays the BFD status for OSPFv3 interfaces.
Displays the BFD status for the IPv4 PIM.
Displays the BFD status for the IPv6 PIM.
Displays the BFD status for the IPv4 PIM interface.
Displays the BFD status for the IPv6 PIM interface.
Displays the BFD status for the VRRP and VRRP3 protocol.
Displays the BFD status for a track policy.
Displays the BFD status for IPv4 static routes.
Displays the BFD status for IPv6 static routes.
December 2017
Verifying the BFD Configuration
page 20-39